• Tous les produits ont été ajoutés à votre panier.

Bont Quadstar

219,95 189,95
Quadstars are perfect for beginners who want more than a starter skate, and intermediate skaters. You can expect an upgrade from what materials an entry level skate is made from and it takes performance to the next level.
Commandé avant 15:00:00, livré demain! Vous avez: 03:39 heures
Bont Quadstar

 
The Quadstar is a boot made with genuine Australian leather on the outer part. The base
of the boot is made from fiberglass so that it is strong ànd heat moldable. This translates
in a boot that has a foot-like shape and is not solely designed to please the eye, but to make you perform efficient on the track.
The thermoplastic heel can be molded, which makes it perfect for skaters with skinny or wide ankles to obtain a custom fit. All you need is 10 minutes and a hair dryer, so no fancy or complicated procedures. The toe box is wider and tougher than the Bont Hybrid boots
The leather outer makes these boots sturdier than entry level skates while staying comfortable as the leather is nice and soft. This will reduce the break in time!
Your foot is held tight in place with the extra help of a velcro strap and the rear heel loop that lets you run the laces through.



Sizing

Bont sizes are somewhat weird when you compare it with your regular shoe size. We found the Bont sizing wizard to be the most accurate (if you can't come try the boots on at the shop or an event). You can find it right here.

 Bont Size 1 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5
 Euro Size 33 34 34.5 35 35.5 36 36.5 37 37.5 38 38.5 39 40 41 41.5 42 43 44 45 46 47 48 49 50 51
 Length (mm) 211 219 223 228 232 236 241 245 250 254 259 263 268 272 276 281 285 290 294 299 303 308 312 317 321
 Standard Width (mm)  78-87 
 81-90 
 82-91 
 84-93 
 85-94 
 86-96 
 87-97 
 89-98 
 90-100 
 91-101 
 92-103 
 94-104 
 95-105 
 96-107 
 97-108 
 99-110 
 100-111 
 101-112 
 102-114 
 104-115 
 105-117 
 106-118 
 107-119 
 109-121 
 110-122 

Bont's info: This size chart shows the exact last size. As a basic rule, most skaters like their boots to be 3-4mm longer than the last. This allows for your feet to grow in length when the boots are tightened. If you like your boots super tight, then just add 1-2mm but be warned, your toes will touch the end and possibly be scrunched. We have also added a width measurement so you can check if your feet are too narrow or wide for the standard boot. If they are, then you should order our narrow or wide boots.

To find your size, place a tape measure on a flat surface up against a wall. Stand on the tape measure with your heal against the wall. If you use a ruler, take into consideration that most rulers have a gap where there are no measurements. Look down and take the measurement from your longest toe. Then use the MM scale on the size chart to find your size.

Here are some examples of mm sizes and the boot size that we would recommend:
253mm + 4mm you should order size 6.5
258mm + 4mm you should order size 7
273mm + 4mm you should order size 9
291mm + 4mm you should order size 11
 
This is what we say: Please measure the length of your feet and compare to the sizing instructions from Bont. Don't count on your EU size to be compatible with Bont boots as the Bont size/Euro size can be waaay off.

-- Unsure about your size? Let us help you! Get in touch for a quick and easy consultation to get you the best fit. Avoid unnecessary shipping charges and let us help you get it right the first time you order. --
-- If you are able to come to our store or visit us at an event, we offer a full boot fitting service with extensive and honest advice. --